Heating Element V2 2.5KW ULWD Clamp

Our 2.5kW ULWD (Ultra Low Watt Density) heating element for mounting on a tri-clamp 50.5mm/1.5″ fitting.

The heating element is equipped with:

• a stainless steel cover to protect the wires
• a cable gland to ensure that the cable is watertight with the cover
• an earth terminal directly on the back of the heating element to make the wiring easier
• supplied with a tri-clamp 50.5mm/1.5″ silicon seal

Heating element ULWD  (Ultra Low Watt Density)  manufactured in 304 stainless type “fold-back”.

Developed length of the element approximately 1.22m which gives a very low watt density of around 8.3W/cm² in order to avoid scorching / caramelizing the wort during boiling.

Power rating of:

• 2500W à 230V (10.9A)

Length of 325mm.

Suitable for pots of 325mm in diameter or more.

All the metal components in 304 stainless steel.